Change a Propane Tank
Propane powered forklifts are normally used in warehouses. The forklift is designed with the propane tank mounted behind the driver. The tanks, which look a lot like beer kegs, need to be replaced every so often as they have a limited lifespan. Operators of forklifts should use care when handling propane tanks. Compressed gases are dangerous, particularly since the gas is flammable. Utilize care when removing and replacing propane tank to prevent injury.
1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn the tank valve off. The lift truck must be left on until the engine dies. This procedure burns the gas off inside the transfer hose that connects the tank and the engine. Prior to taking the next steps, wear the correct safety equipment, such as insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from touching the compressed gas, which is extremely cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 Leaks can be checked simply by applying soapy water to the valve and slightly opening it. If there is a leak, it will cause bubbles to froth from around the valve. If this happens, inspect the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks in the valve area, and after that do the leak checking process again. Persistent leaks mean that both the nut and connecting hose should be replaced. Nonetheless, if replacing the nut and hose still does not stop the leak, the tank would need to be replaced.
4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. After that you can start the lift truck and continue operating.