To give you an idea of the cost, a Nissan Propane Forklift dating from the latter part of the 1990s would run you about $11,000 to $14,000. More than likely, you would be able to find a unit like this with fewer than 5,000 operating hours, approximately 15 feet of lifting capacity and cushion tires. On the other hand, a used Nissan forklift truck which has less than 5,000 hours can be found for less than $7,000. This alternative might be a little bit of an older model than several others, but remember; everything revolves around the operating hours. A model like this will probably have a fairly good load capacity of approximately 5,000 lbs.
Newer Nissan forklifts from the year 2005 to the current year, could be found priced near $10,000. Typically, these units would have a regular lift capacity ranging from 4,000 to 5,000 lbs. Normally, a model similar to this would run smoothly and have cushion tires. Of course, newer units normally run smoother compared to older ones.
Kinds of Forklifts
Normally, forklifts are categorized in 2 specific ways: by the type of fuel it takes and the structure of the lift truck. Based on structure, the following kinds of lift trucks are among the most common:
Standard Forklift: The standard forklift comprises the typical warehouse equipment we are all familiar with. These kinds of lift trucks provide a lifting capacity of 3,000 to 5,000 lbs. They have a height capacity of roughly 20 feet.
Reach Forklift: Usually known as a narrow aisle lift truck, the reach forklift is the type of equipment that is found within distribution centers and warehouses where space is at a premium. Narrow construction means that it is not able to lift as much as a typical lift truck unit, although, it has an extendable mast which can easily lift loads approximately 40 feet.
Telescopic Forklift: Telescopic lift trucks are also known as telehandlers, telescopic handler or extendable reach forklifts. These types lift truck trucks are a more rugged and heavy-duty version of a regular lift truck. These units offer a telescopic boom which is capable of being extended out and raised up. Normally, these models are used on rough terrain. They could can move loads weighing over 30,000 pounds and are able to handle loads up to 70 feet high
Straight Mast Forklift: The straight mast forklift is most commonly utilized to perform tasks on rough terrain. These kinds of forklifts can only transport loads vertically, not like a telescopic unit. These units can reach a height of 10 to 30 feet, while raising loads up to 12,000 lbs.