Forklift Attachments Canada - Without forklift attachments, many jobs would be difficult, if not impossible. There are numerous forklift attachments that make jobs faster and safer to complete. Forklift operators require training for each attachment they will be using as well as their general forklift training.
Forklift attachments come in a wide variety of hydraulic and non-hydraulic attachments. The benefits of utilizing a forklift attachment include decreasing:
1. Employee accidents;
2. Damage to stock;
3. Manpower;
4. Time; and
5. Fuel consumption.
Equipment Considerations
Forklift attachments can be switched out to replace existing attachments or may be used on machines that don’t currently have one. Several equipment-related factors must be considered before any forklift attachment is replaced or added. These considerations include:
1. The forklift type;
2. The forklift’s capacity;
3. The carriage type; and
4. The number of hydraulic functions.
Not considering these issues will drastically increase the safety risks associated with operating the machine and its attachments. This can increase risks relating to operator safety, forklift damage, stock damage and more. Extra safety factors must be considered which will be discussed in more detail.
Forklift Rating and Re-Rating
Manufacturers give forklifts a lift capacity rating that needs to be considered and adjusted when adding or changing forklift attachments. Manufacturers of forklift attachments usually offer calculators available online to estimate the safe lifting capacity when using a particular attachment. It is important to note that only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. After the manufacturer of the forklift has re-rated the forklift, it should have a new factory authorized specification plate. This new specification plate will replace the original plate and should be installed showing the new rating for the forklift.
Equipment Upgrades
It is vital to note when working with forklift attachments the equipment’s hydraulic function consists of a forklift valve that has a lever located near the operator which creates two areas for pressurized hydraulic passages for oil. Note that not every attachment is hydraulic; however, the hydraulic attachments provide more features compared to the number of valves the forklift offers. In these instances, one or more valves need to be added. There are numerous ways a valve can be added. The manufacturers of forklifts create accessories to simplify hose and valve routing. There are plenty of labor and parts involved which can be costly enough to make this an impractical solution. Another possibility is to install a cable reel, solenoid valve and hose to divert oil from an alternate location. However, the operators’ view may be compromised due to the cable reels and hose installation. These parts also may be easily damaged by their location. Special hoses and a solenoid valve kit an be used to create an electrical conduit out of the reinforced braid. Because these hoses replace the existing hoses housed in the forklift, the hoses are safe from damage while keeping the operator’s field of vision clear.
Safety Considerations
Prior to fitting any type of forklift attachment, proper training must be obtained. The operator needs to be able to remove, fit and operate the attachment.
Two important safety factors must be considered before the use of any forklift attachment.
The nominal load rating will be reduced on the forklift once any attachment is applied. Forks and a stock fork carriage compute the nominal load rating; although, the precise load rating may be much lower.
Secondly, the forklift’s center of gravity will be affected when any forklift attachment is added. Obviously, the stability of the forklift is reduced. Since the attachment’s weight is prominent in front of the fulcrum point on the forklift, the operator needs to drive the machine as though it is partially loaded even before it is carrying a load. Thus, when using any attachment, an operator should travel at a slow speed and make turns slowly and gently. Every attachment should be listed on the forklift capacity data plate.
Specific safety checks must be made prior to using each forklift attachment. The attachment must be:
1. Appropriate for the specific forklift being used;
2. Appropriate for the specific load;
3. Attached correctly;
4. Properly locked; and
5. Permitted on the forklift’s data plate.
List of Common Forklift Attachments
A list of the most common attachments and their general uses are set out below. There are many more attachments available than are listed here but this will cover the most widely-used. Forklift attachments are designed to increase job efficiency for many applications.
SIDESHIFTER:
Allows the operator to move the forks laterally, allowing for easier placement of a load without the need to reposition the entire forklift.
FORK POSITIONERS:
Moves the forks together or apart in relation to one another to adjust for various load types.
DIMENSIONING DEVICES:
Dimensioning devices feature cargo dimensions useful for creating better efficiency in trucks, trailers and warehouses. This technology is often used alongside billing systems that monitor volume.
ROTATOR:
Assists in righting skids that have tilted, handling custom load requirements and quick unloading. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
Allows for grasping of load with a rounded shape, such as rolled material and barrels, often with various pressure setting to avoid damage to more fragile materials. These attachments sometimes also have a rotate function to assist with, for example, rotating an item from a horizontal to a vertical position.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Pole attachments are placed where the forks would normally be and are used for transporting carpet and rolled up linoleum.
SLIP SHEETER OR PUSH-PULL:
Slip sheeter or push-pull attachment lets the operator move slip sheets with a clamping option instead of pallets. It can pull the slip sheet onto thin and wide metal forks to facilitate pushing or loading. The attachment variations include “Save,” where the slip sheet is removed to be used again or “Standard.”
DRUM HANDLER:
The drum handler is built for holding drums. It may have arms that encompass the drum for transporting or it may feature a spring-loaded jaw to grip the drum’s top lip.
DRUM AND STORAGE BIN TIPPER:
Allows for quick transfer of loose or liquid contents in large containers.
MAN BASKET:
Lift platform meant for lifting workers and complete with railings and brackets for safety harnesses.
TELESCOPIC FORKS:
Telescopic forks are used in warehouses that rely on stacking two pallets in the event one shelf is located behind another shelf with no aisle in between.
SCALES:
Scales allow forklift operators to weigh their pallets during transport. This increases efficiency by providing simultaneous data and not making the operator travel back and forth to scales. This attachment can be used for operators who bill by weight in legal-for-trade applications.
SINGLE-DOUBLE FORKS:
The single-double forks can be used alongside regular lifting tasks. It allows a single pallet or platform to move or two pallets beside each other. Additional attachments can be used and this replaces the need for having a separate specialty unit; thus reducing maintenance and operating costs associated with more than one machine.
SNOW PLOW:
Snow plows are used to remove snow and redistribute it; however, this attachment can be used with other loose kinds of material.
SKIPS:
Skips facilitate fast and safe removal of waste to the proper waste or skip compactor. Skips are either a bottom-emptying model or a roll-forward type.
BOOMS AND JIBS:
Jibs and boom offer extended forklift reach for transporting loads that are stacked deep or high or that are suspended. There are reach-over, low profile, precision lifting and extendable length options.
Forklift Attachment PDF
