In the majority of situations, most individuals spend quite a bit of money buying their lift truck. Hence, it is really important to take proper care of it so as to protect your investment well into the long run. It is really a great idea to know the procedures that are carried out in the maintenance and care of this piece of machinery.
By starting up the forklift and listening carefully how it runs is one of the best ways to tell how good the engine is performing. For instance, if there are any misses or knocks, the machine is faulty and this must raise some issues. Also listen closely for any squealing sounds which come from the belts because these sounds would provide you with a lot of information.
Several of the main parts requiring attention during maintenance consist of the safety warning devices, gauges, horn, the overhead guard and the lights. Any burnt out light bulbs or faulty components should be replaced as soon as they are noticed. It is also essential to check the wiring.
After the above components have been inspected thoroughly, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each and every battery cell must be checked so as to make sure that the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the machine and then change the filters. The fuel filters, hydraulic filter and the transmission filter need to be replaced on a regular basis. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker to be able to keep track.
After the oil change is done and the filters have been replaced, a visual inspection of the drive axle has to be carried out. If there is a grease fitting on the axle make certain to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. After that, check every other component of the equipment like the wheels. If any kind of concern or fault is detected, be certain to address it immediately in order to make certain the machinery is running at its safest and optimum levels.