Call Toll Free -  888-670-1195
Stock Number: 208002
Make: Hyundai
Model: 110D-7A
Year: 2014
Stock Number: 208167
Make: Hyundai
Model: 110D-7A
Year: 2014
Stock Number: EQU005103
Make: Hyundai
Model: 110D-7A
Year: 2014
Stock Number: 301046
Make: Hyundai
Model: 110D-7A
Year: 2015
Stock Number: 205639
Make: Hyundai
Model: 110D-7A
Year: 2010
Stock Number: 301047
Make: Hyundai
Model: 110D-7A
Year: 2015
 


  • There are healthy and safety guidelines governing the utilization of lift trucks. Any big machine, such as a lift truck, is potentially dangerous and should be used safely. The regulations and rules state that the driver should carry out daily checks on the lift truck and more thorough checks on a weekly basis and every month. The following inspections should be performed on the forklift: Forklift Brakes - brakes on forklifts are key features that must be double and triple checked. A brake check is carried out with various pressures and pedal heights to determine the sensitivity of the brakes. The brake lights should be inspected at the same time. The Tires - lift truck tires are also important for the safe functioning of the forklift truck and to the braking system. All the tires should be checked properly to make certain that there are no punctures in the tires and they are inflated to the proper pressure. Controller - the forklift controller system is checked by operating the forks and the release to know that the system is in good working order. Any hint of issues should immediately reported and tended to. The forklift must not be utilized until the controller system has been repaired. Steering Wheel - In order to make sure that the turning of the wheel is correct, the operator should inspect the lift truck steering wheel. Lift truck safety depends upon the steering wheel responding well and functioning precisely. There are different kinds of checks that could be carried out to determine the performance of the steering wheel. Engine Oil - the engine oil needs to be inspected by removing the dip stick from the lift truck engine. The dipstick will show both the oil color and the oil level. The oil should be refilled if the level is too low. If the colour is off, there might be contamination happening. Fire Extinguisher - forklifts are required by law to carry a fire extinguisher. This fire extinguisher would need to be tested to ensure it will work correctly in the event of a fire. Various kinds of fire extinguisher must be checked in specific ways. Like for instance, a dry chemical extinguisher needs to be shaken. More

  • Various Classes of Aerial Lift Aerial lifts are a particular type of heavy machine that allows employees to be raised into the air. These equipment could be used to perform maintenance and repairs in places that are high up in the air such as on roofs, near street-light fixtures and power lines. Similar to most devices, there are various kinds of aerial lifts which could be used to complete a variety of tasks. For the utmost safety, every kind of different type of machine requires right training and specific certification before using it. Scissor Lifts Genie lifts are a different name for scissor lifts. These machinery are the most basic type of aerial lift available. These lifts are made of a platform which is raised up utilizing pneumatic power and are mainly used for indoor applications. Usually, scissor lifts are the safest type of lift models. When completely compressed, these scissor lifts could be driven like big carts. Generally, when the platform is extended, they could not be driven for safety reasons. Before anybody could utilize these devices, employees should be licensed as operators. Boom Lifts Compared to a scissor lift, boom lifts are a lot more complex kind of aerial lift machinery. A boom lift has a wide base in order to keep the lift anchored. It utilizes a jointed arm which has a bucket on the end of it. There is a control box situated in the bucket that allows the operator to hoist and lower the bucket. Since the arm of the boom is jointed, it could also move from side to side. The boom lift resembles a tail of a metal scorpion. Traditionally, it is used in construction applications outdoors. The boom lift is considered to be more risky to run than scissor lifts, hence, operators need to be certified separately for these types of lifts. More

  • Genie material lifts are well made, sturdy, reliable equipment that could be utilized for a wide-range of applications, both indoors and outdoors. Reliable, high quality performance can be expected in each of Genie's portable and light weight units. Genie is a cost-effective solution for many work site applications. Genie material lifts are set up easily by just one person and could be ready to work in no time. All lifts can be set up, transported, and used in a pickup truck or any standard-sized service truck. The telescopic pneumatic hoists engineered by Genie provide a portable, light weight, and compact size which make them the ideal for lifting all types of loads for installation purposes. To make every machinery meet individual work requirements, lots of options and accessories are available to you. The very first Genie Hoist was launched into the workplace during the year 1966. This particular machine became so popular due to its effectiveness, portability and uniqueness that Genie continued to develop its product into the diverse variety of equipment offered on the market today. Using CO2 or compressed air, the really portable telescopic pneumatic hoist, the Genie Super Hoist, can lift loads as much as 136 kilograms to heights of 3.8 meters or 113 kilograms to heights of 5.6 meters. One tank of compressed air or CO2 provides the user with about 80 to 90 lifts. The bottle mounting bracket could fit any common size CO2 bottle, but a 9 kilogram tank is offered as an accessory option. When not in use, the 4.87 meter long hose could be stored around brackets which are under the platform. Genie hoists have a patented pistol-grip control handle where the dump valve and down and up functions are activated. This control handle could clip onto a storage button on the side of the cylinder when not being utilized. Ever since their introduction during the year 1966, Genie has been developing and providing round lifting products for numerous types of work sites. These types of equipment provide a useful addition to your work site machinery for both indoor and outdoor jobs. More

  • In the year 1861, the company Harland and Wolff was established. Mr. Gustav Wilhelm Wolff, born in Hamburg during 1834, together with Mr. Edward James Harland born in the year 1831, formed the company. During the year 1858 Harland, who was the general manager during the time, purchased the small shipyard on Queen's Island. He bought the property from Robert Hickson, who was his employer. Harland at one time purchased Hickson's shipyard and made his assistant Wolff a partner in the business. Gustav Wolff was Gustav Schwabe of Hamburg's nephew. He has invested mostly in the Bibby Line. The initial 3 ships that the brand new shipyard built were for that line. By being innovative, Harland made the business a successful venture. Amongst his well-known suggestions was increasing the overall strength of the ship by replacing the upper wooden decks with iron ones. As well, he was able to increase the capacity of the ship by giving the hulls a squarer cross section and a flatter bottom. The company eventually faced increasing pressures in the shipbuilding industry causing them to shift their focus and broaden their portfolio. They chose to concentrate less on shipbuilding and more on structural design and engineering. The company also diversified into the areas of ship repair, offshore construction projects as well as competing for additional projects which had to do with metal engineering or construction. Harland and Wolff had other interests, such as a series of bridges to be constructed in Britain and in the Republic of Ireland. These bridges comprise the restoration of the James Joyce Bridge and Dublin's Ha'penny Bridge. During the 1980s, with the building of the Foyle Bridge, their first venture into the civil engineering sector took place. Today, the last shipbuilding project of Harland and Wolff was the MV Anvil Point. This was amongst six almost identical Point class sealift ships that was constructed to be utilized by the Ministry of Defense. The ship was launched during 2003, after being constructed under license from Flensburger, Schiffbau-Gesellschaft, shipbuilders from Germany. More

  • Kinds of Tires Normally, cushion tires are solid tires that have no tread pattern. They are mainly designed to be utilized on smooth and solid surfaces, usually indoors. There are tread patterns available though, that are more suitable for various surface environments. The cushion tires are common on smooth warehouse floors and in similar applications. Pneumatic tires however will require air and are made specially for loose surfaces on uneven ground. The pneumatic tire provides a higher ground clearance over solid tires. This raises the forklift's center of gravity and really lessens its rated lift capacity. More often than not, pneumatic tires are used in rough terrain surroundings because of their ability to navigate uneven surfaces in a smoother manner. Numerous construction sites and mining or agricultural applications depend on these tires so as to make certain the machine could travel as carefully and safe as possible. Lift Capacity and Lift Height In order to determine the capacity of the vehicle needed, it is essential to understand the maximum weight and dimensions of the loads you would be handling. Moreover, you must know the maximum fork height required to be able to rack or stack the loads. These factors, the lifting height as well as the load size, really affect the lift capacity of the truck. A bigger size load is able to move the vehicle's center of gravity and change the load combination. This decreases the equipment's lifting capacity and affects the height and the load being lifted. Using different attachments can also affect the overall capacity of the truck. Mast Options There are lots of different options of masts existing on the market. Like for instance, there are single, double, triple and quad, the numbers indicate how many stages or sections the mast has. In a variety of circumstances, you would not be required to make any choices since the lift height would dictate the type of mast you will get, however, in trucks with really high lift heights, you could have a choice. More