Stock Number: EQU003173
Make: Ottawa
Model: 30
Year: 2004


Stock Number: 204592
Make: Mitsubishi
Model: FG25N-LP
Year: 2008


Stock Number: 206542
Make: CAT
Model: P6000-LE
Year: 2012


Stock Number: 266101
Make: Genie
Model: GL10-STR
Year: 2011


Stock Number: EQU000203
Make: Tico
Model: ProSpotter
Year: 2017


Stock Number: 301413
Make: Capacity
Model: TJ7000
Year: 2006


Stock Number: EQU001433
Make: CAT
Model: C6000
Year: 2007


Stock Number: 301433
Make: Capacity
Model: TJ7000
Year: 2007


Stock Number: 207509
Make: Hyundai
Model: 25L-7M
Year: 2013


Stock Number: 2-16-230343
Make: Terex-Comedil
Model: CTT181/B-8 TS21
Year: 2008


Stock Number: 2-16-600274
Make: Liebherr
Model: 78EC
Year: 1992


Stock Number: 2-16-268336
Make: Terex-Comedil
Model: CTT561/A-32 HD23
Year: 2003


 
Doosan Gas Forklifts

Doosan Gas Forklifts

The turning radius on a lift truck is also referred to as the turning circle. This information is important for a machinery driver to have. It gives the operator the knowledge of how much space is required to turn the lift truck around. Like for example, a tighter turning radius allows the machine to successfully function in restricted places and congested areas, therefore enhancing the forklift's maneuverability. Operators who are not aware of this measurement can cause damage to the property or to the equipment.

Before checking the turning radius, check the steering geometry alignment and correct it if it needs adjustment. Begin the test with having the trained driver in the cab to control the equipment's functions. Another individual on the ground uses a spray bottle or a hose to wet the outside and inside of the model's wheels. After that, drive the equipment in a complete circle with the wheels turned to the maximum angle. Repeat the procedure once and if necessary, continue to wet the wheels.

Measure the watermarks left by the tires utilizing a tape measure once your measurement test has been completed. The watermark test begins from the midpoint of the tire mark to a similar point across the diameter of the circle. For the outside turning diameter, measure the watermark left by the outside tires from one side of the circle to the circle's opposite side. You can establish the inside turning radius by stretching the tape measure across the circle left by the inner tires. After that, divide these numbers in 2 in order to determine the turning radius. Be certain to note that the turning center is the midpoint of the diameter of the circle.

Drop a plumb line from the extreme outside radial extension on the vehicle in order to determine the wall-to-wall turning diameter. When this is done, next locate the point on the pavement directly underneath. This point to the turning center indicates the equipment clearance radius. As a rule, wall-to-wall turning diameter is twice the clearance radius of the vehicle.

  • Jungheinrich Order Picker Forklifts
    There are healthy and safety guidelines governing the utilization of lift trucks. Any big machine, such as a lift truck, is potentially ... More
  • Terex Articulated Man Lifts
    Various Classes of Aerial Lift Aerial lifts are a particular type of heavy machine that allows employees to be raised into the air. ... More
  • Genie Scissor Lifts
    Genie material lifts are well made, sturdy, reliable equipment that could be utilized for a wide-range of applications, both indoors and ... More
  • Wolff Tower Cranes
    In the year 1861, the company Harland and Wolff was established. Mr. Gustav Wilhelm Wolff, born in Hamburg during 1834, together with ... More
  • Toyota Narrow Aisle Forklifts
    Kinds of Tires Normally, cushion tires are solid tires that have no tread pattern. They are mainly designed to be utilized on smooth ... More