Stock Number: 2-16-600285
Make: Liebherr
Model: 68K
Year: 1993


Stock Number: EQU001400
Make: CAT
Model: C5000-LE
Year: 2013


Stock Number: 2-16-600279
Make: Liebherr
Model: 200HC
Year: 1982


Stock Number: 211758
Make: JLG
Model: 860SJ
Year: 2012


Stock Number: 208413
Make: Mitsubishi
Model: FG50CN1
Year: 2014


Stock Number: EQU003392
Make: Genie
Model: S85
Year: 2006


Stock Number: 301427
Make: Capacity
Model: TJ7000
Year: 2006


Stock Number: 301099
Make: Liftking
Model: LK50C
Year: 2003


Stock Number: 232243
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 301587
Make: Genie
Model: S125
Year: 2008


Stock Number: 232147
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 211916
Make: JLG
Model: 450AJ
Year: 2013


 
Daewoo Propane Forklifts

Daewoo Propane Forklifts

Change a Propane Tank
Propane powered forklifts are normally used in warehouses. The forklift is designed with the propane tank mounted behind the driver. The tanks, which look a lot like beer kegs, need to be replaced every so often as they have a limited lifespan. Operators of forklifts should use care when handling propane tanks. Compressed gases are dangerous, particularly since the gas is flammable. Utilize care when removing and replacing propane tank to prevent injury.

1 If there is a need to replace the propane tank, the first step is to stop the lift truck, then turn the tank valve off. The lift truck must be left on until the engine dies. This procedure burns the gas off inside the transfer hose that connects the tank and the engine. Prior to taking the next steps, wear the correct safety equipment, such as insulated gloves made of either leather or neoprene. It is vital for you to protect your skin from touching the compressed gas, which is extremely cold.
2 Disconnect the hose from the tank and take off the holding straps to remove the tank. When putting in a new tank, tighten the nut to reattach the holding straps and to reconnect the hose at the valve of the tank.
3 Leaks can be checked simply by applying soapy water to the valve and slightly opening it. If there is a leak, it will cause bubbles to froth from around the valve. If this happens, inspect the connection hose at the nut and the valve area. Re-tighten the connecting nut if you detect any leaks in the valve area, and after that do the leak checking process again. Persistent leaks mean that both the nut and connecting hose should be replaced. Nonetheless, if replacing the nut and hose still does not stop the leak, the tank would need to be replaced.
4 Lastly, open the valve all the way to enable the gas to fill the connecting hose. After that you can start the lift truck and continue operating.

  • Jungheinrich Order Picker Forklifts
    There are healthy and safety guidelines governing the utilization of lift trucks. Any big machine, such as a lift truck, is potentially ... More
  • Terex Articulated Man Lifts
    Various Classes of Aerial Lift Aerial lifts are a particular type of heavy machine that allows employees to be raised into the air. ... More
  • Genie Scissor Lifts
    Genie material lifts are well made, sturdy, reliable equipment that could be utilized for a wide-range of applications, both indoors and ... More
  • Wolff Tower Cranes
    In the year 1861, the company Harland and Wolff was established. Mr. Gustav Wilhelm Wolff, born in Hamburg during 1834, together with ... More
  • Toyota Narrow Aisle Forklifts
    Kinds of Tires Normally, cushion tires are solid tires that have no tread pattern. They are mainly designed to be utilized on smooth ... More