Stock Number: EQU003306
Make: Capacity
Model: TJ 6500
Year: 2009


Stock Number: EQU005031
Make: Taylor
Model: TEC155H
Year: 1993


Stock Number: 232140
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 301235
Make: Fantuzzi
Model: 500G5
Year: 2003


Stock Number: EQC014231
Make: CAT
Model: DP50CN1
Year: 2014


Stock Number: 2-18-UEF80
Make: Misc
Model: FORKS
Year: 0


Stock Number: 207940
Make: Manitou
Model: MT6642
Year: 2014


Stock Number: 208609
Make: Hyundai
Model: 30L-7M
Year: 2015


Stock Number: 300673
Make: JLG
Model: M600JP
Year: 2016


Stock Number: EQC013485
Make: Genie
Model: GTH1056
Year: 2011


Stock Number: 212162
Make: JLG
Model: 800AJ
Year: 2013


Stock Number: 2-16-600286
Make: Liebherr
Model: 35K
Year: 1990


 
Hyster Loaded Container Handlers

Hyster Loaded Container Handlers

It is suggested to regularly inspect the front end of your forklift as part of your pre-shift or daily inspection, in order to help prevent expensive forklift repairs. By catching any problems as they arise or ahead of time, you could also help prevent damage to any loads too. The following includes some of the common guidelines on what particular things to inspect during frequent inspections of your material handling fleet.

Forks
Regularly checking the forks is important because if these are worn out or cracked, they might fail without warning. Any type of fork damage means that your forklift should immediately be removed from service until it is fixed and safe once more. Visually inspect your forks for any noticeable indications of wear or damage. If the cracks run deeper than on the surface, replace them. Any wear on the forks beyond 10 percent is another sign that you must replace the forks.

Mast
The mast should ideally tilt forward and backward while being able to move up and down. You might need to lubricate the mast strip sliding surfaces and fittings if you find that the sliding surfaces are binding. On the inner mast there is a fitting situated on each side. The lift bracket side rollers are a different lubrication point and there is also one on each side roller. When the lubricating has been completed, tilt it forward and backward and also lower and raise the mast a few times in order to ensure that the lubricant is worked correctly into the fittings.

Tilt Cylinders
Your daily inspection has to involve the checking for oil leaks and damage because an uncontrolled mast movement can be caused by oil leakage. Whether the leaks are external or are located inside of the cylinder, the end result may be cylinder drift and loss of fluid. If there are any signs of leaks or damage, you might have to replace just the seals or the whole cylinder assembly.

Chains
The mast chains have to be inspected to see if they are being stretched beyond their acceptable limits. In addition, inspect the chain wear guage or check the chains for indications of damage. If there is wear beyond 2 percent, replace the chain. Also replace it if the chain looks rusted or kinked. The sheave bearings and the chain rollers also need to be checked for signs of wear.

Usually, mast lift chains wear at the pin-to-link connections. If you discover wear, you could experience chain failure. This can end up damaging front end parts or even the product. If you need help determining what precisely to check on your forklifts or if you do not have time on hand to carry out regular fleet inspections, simply call your local forklift dealer. Their trained service technicians would help your perform planned maintenance or PM checks based on your scheduling and application requirements.

  • Jungheinrich Order Picker Forklifts
    There are healthy and safety guidelines governing the utilization of lift trucks. Any big machine, such as a lift truck, is potentially ... More
  • Terex Articulated Man Lifts
    Various Classes of Aerial Lift Aerial lifts are a particular type of heavy machine that allows employees to be raised into the air. ... More
  • Genie Scissor Lifts
    Genie material lifts are well made, sturdy, reliable equipment that could be utilized for a wide-range of applications, both indoors and ... More
  • Wolff Tower Cranes
    In the year 1861, the company Harland and Wolff was established. Mr. Gustav Wilhelm Wolff, born in Hamburg during 1834, together with ... More
  • Toyota Narrow Aisle Forklifts
    Kinds of Tires Normally, cushion tires are solid tires that have no tread pattern. They are mainly designed to be utilized on smooth ... More